Skippy The Magnificent

cover

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8382].jpg

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8376].jpg

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8377].jpg

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8379].jpg

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8371].jpg

20250708_超省料拓竹料盘干燥罐_4x3_[XT5S8375].jpg

Screenshot 2025-07-08 at 8.09.38 PM.png

Screenshot 2025-07-08 at 8.09.51 PM.png

Screenshot 2025-07-08 at 8.10.19 PM.png

Screenshot 2025-07-08 at 8.11.12 PM.png

Screenshot 2025-07-08 at 8.10.57 PM.png

Screenshot 2025-07-08 at 8.10.45 PM.png

Screenshot 2025-07-08 at 8.10.28 PM.png

Screenshot 2025-07-08 at 8.11.44 PM.png

plate_1.png

2025-07-09_965536dcbdff8.jpg

使用PLA打印时获得最快打印速度；使用ASA打印时最节省耗材。<ul><li>请将墙生成模式设置为“Arachne”！</li><li>层高0.2mm；</li><li>0.4mm喷嘴；</li><li>无需支撑、无需裙边。</li></ul>

Achieve the fastest print speeds when printing with PLA;Minimize filament consumption when printing with ASA.<ul><li>Set the wall generation mode to "Arachne"!</li><li>0.2mm layer height;</li><li>0.4mm nozzle;</li><li>no supports, no brim.</li></ul>

0.2mm layer, 2 walls, 5% infill

底部文字标记：PLA / 57°C<ul><li>0.4mm喷嘴</li><li>0.2mm层高</li><li>2层墙</li><li>5%填充</li><li>墙生成模式“Arachne”</li></ul>

Bottom text mark: PLA / 57°C<ul><li>0.4mm nozzle</li><li>0.2mm layer</li><li>2 walls</li><li>5% infill</li><li>Wall generation mode “Arachne”</li></ul>

Bottom text mark: PLA / 57°C

底部文字标记：PETG / 69°C<ul><li>0.4mm喷嘴</li><li>0.2mm层高</li><li>2层墙</li><li>5%填充</li><li>墙生成模式“Arachne”</li></ul>

Bottom text mark: PETG / 69°C<ul><li>0.4mm nozzle</li><li>0.2mm layer</li><li>2 perimeters</li><li>5% infill</li><li>Wall generation mode “Arachne”</li></ul>

Bottom text mark: PETG / 69°C

底部文字标记：ABS / 87°C<ul><li>0.4mm喷嘴</li><li>0.2mm层高</li><li>5%填充</li><li>墙生成方式“Arachne”</li></ul>

Bottom text label: ABS / 87°C<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>5% infill</li><li>Wall generation method “Arachne”</li></ul>

Bottom text label: ABS / 87°C

底部文字标记：ASA / 100°C<ul><li>0.4mm喷嘴</li><li>0.2mm层高</li><li>5%填充</li><li>墙生成方式“Arachne”</li></ul>

Bottom text mark: ASA / 100°C<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>5% infill</li><li>Wall generation method “Arachne”</li></ul>

Bottom text mark: ASA / 100°C

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>[ 2025-12-19 更新/Update ] [ZH] 已发布新版干燥罐！更结实、更透气！专为FDM打印优化重新设计！支持0.4mm及0.6mm喷嘴！支持SuperClear超透打印！点击下方图片跳转至<a href="%E3%80%8Av4%E6%96%B0%E4%B8%80%E4%BB%A3%E5%BF%AB%E6%89%93%E5%B9%B2%E7%87%A5%E7%BD%90%E3%80%8B%E4%B8%BAFDM%E4%BC%98%E5%8C%96%E8%80%8C%E7%94%9F%EF%BC%81%E6%9B%B4%E7%BB%93%E5%AE%9E%EF%BC%81%E6%9B%B4%E9%80%8F%E6%B0%94%EF%BC%81%E6%94%AF%E6%8C%810.4mm%E5%8F%8A0.6mm%E5%96%B7%E5%98%B4%E6%89%93%E5%8D%B0%EF%BC%81%E6%94%AF%E6%8C%81SuperClear%E8%B6%85%E9%80%8F%E6%89%93%E5%8D%B0%EF%BC%81" rel="ugc">新版模型页面</a>。 [EN] New canister version published! Stronger, better airflow! Redesigned from scratch, optimized for FDM printing! Supports 0.4mm and 0.6mm nozzles! Supports SuperClear Transparent printing! Click on image below to navigate to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com.cn/zh/models/1910809">model page</a>.</h2><figure class="image image_resized" style="width: 60.01%"><a href="https://makerworld.com.cn/zh/models/1910809" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001589544/design/2025-12-19_0e03e430e21fd8.jpg"></a><figcaption>《v4新一代快打干燥罐》为FDM优化而生！更结实！更透气！支持0.4mm及0.6mm喷嘴打印！支持SuperClear超透打印！</figcaption></figure><h2> </h2><h2>[ 此模型已不推荐打印，请前往新版本打印 ] 闪电打印速度！超省料！仅需13g！自锁料盘不会脱落！可标记！</h2>打印时间仅需48分钟！带锁扣，安装牢固，不会脱落的干燥罐！底部带有三个裙边，可进行标记！（如：干燥罐所使用的耗材类别、抗热温度）&nbsp;如耗材需要高温烘干，请使用具有抗热性能的耗材制作干燥罐！打印前请清洁打印板以获得最佳附着能力！&nbsp;&nbsp;如有任何问题请在下面评论区留言！ 谢谢！&nbsp;<boostme><boosttitle>为我助力</boosttitle><boostcontent>你的助力是我的动力！非常感谢你的助力支持！</boostcontent></boostme>

<h2>[ 2025-12-19 Update ] New canister version published! Stronger, better airflow! Redesigned from scratch, optimized for FDM printing! Supports 0.4mm and 0.6mm nozzles! Supports SuperClear Transparent printing! Click on image below to navigate to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com.cn/zh/models/1910809">model page</a>.</h2><figure class="image image_resized" style="width: 60.01%"><a href="https://makerworld.com.cn/zh/models/1910809" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001589544/design/2025-12-19_0e03e430e21fd8.jpg"></a><figcaption>"v4 Next-Gen Fast-Print Drying Canister" optimized for FDM! Stronger! Better airflow! Supports 0.4mm and 0.6mm nozzle printing! Supports SuperClear Transparent printing!</figcaption></figure><h2> </h2><h2>[ This model is no longer recommended for printing, please go to the new version for printing ] Lightning-fast printing speed! Super material-saving! Only 13g! Self-locking spool will not fall off! Markable!</h2>Print time is only 48 minutes! A drying canister with a clasp, securely installed, that will not fall off!The bottom has three skirts for marking! (e.g., filament type used in the drying canister, heat resistance temperature)&nbsp;If the filament requires high-temperature drying, please use heat-resistant filament to make the drying canister!Please clean the build plate before printing for optimal adhesion!&nbsp;&nbsp;If you have any questions, please leave a comment in the section below! Thank you!&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your boost is my motivation! Thank you very much for your boost support!</boostcontent></boostme>

Print Profile(5)

Description

[ 2025-12-19 Update ]
New canister version published! Stronger, better airflow! Redesigned from scratch, optimized for FDM printing! Supports 0.4mm and 0.6mm nozzles! Supports SuperClear Transparent printing! Click on image below to navigate to model page.

[ This model is no longer recommended for printing, please go to the new version for printing ] Lightning-fast printing speed! Super material-saving! Only 13g! Self-locking spool will not fall off! Markable!

Comment & Rating (25)

License

Related Models

Lightning-fast print, only 13g of filament, featuring a locking spool dryer with clasp