R-36 Eruptor (helldivers 2) - Free 3D Print Model

Search models, users, collections, and posts

ReProps2003

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1S

P1P

X1E

H2D

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.8mm nozzle, 0.5mm layer, 1 walls, 10% infill

Designer

25.9 h

3 plates

5.0(2)

Open in Bambu Studio

Boost

109

317

172

Released

Description

Summary

big boom sniper. Takes 1/2 inch rods/dowels for the support/assembly and for the charging handle assembly. the charging handle should be able to slide. split for printing, see plate files for bamboo printers.

SPRING ASSEBLY FILES REPLACES THE TWO MAIN BODY PARTS TO ALLOW FOR THE BOLT TO RETRACT AND SPRING BACK ON ITSELF. Print the spring with the length to the build plate, the flat sides on it.

Comment & Rating (6)

@Spideyjluv

Print Profile

0.8mm nozzle, 0.5mm layer, 1 walls, 10% infill

Not Glued yet. Still need to fashion a dowell because 1/2" isn't the right size. The core size seems more like a tiny bit smaller than 5/8". Colored in Bambu studio & printed with the proper color filaments on an H2D dual AMS. Took over 2 weeks to do it all. Color match isn't perfect, but overall happy with the results and the quality of the model. Thanks!

@galganaban

Hole size too big for 1/2" dowel, too small for 5/8 :') Registration holes for the handle and body would be a good revision. Overall great print!

(Edited)

@SEEKERV47

Could you do a Stalwart next pretty pwees

@user_4188637157

what length is the 1/2 inch rod??

@harakiwi

Boosted

Print Profile

0.8mm nozzle, 0.5mm layer, 1 walls, 10% infill

first time printing with 0.8mm, made that one part as test print on my 0.4mm nozzle (for painting practice first) 🫶 Hope to post the final prop in a week!

@inca_kola

Is 0.8mm nozzle required? I only have a 0.4 and I've tried to convert it in Bambu Studio but the print has failed no matter how I try to adjust the plates.

No more