Empty Chamber Indicator - Free 3D Print Model

Search models, users, collections, and posts

jkisser

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

X1 Carbon

A1 mini

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% gyroid infill

Designer

30 min

1 plate

4.9(40)

Open in Bambu Studio

Boost

349

617

479

Released

Description

There are many empty chamber indicators out there but I wasn't happy with any of them so I decided to make my own. This should work for all calibers from .22 and up. Some smaller chambered firearms may need the ‘tail’ trimmed off a bit but I can confirm that this fits in a Marlin Model 60.

*** Shooting is a fun but inherently dangerous activity. You are responsible for your safety and those around you on the range. Please follow the universal firearms safety rules at all times.***

empty chamber indicator

empty chamber

flag

empty chamber flag

Comment & Rating (47)

@Noobie3DPrintin

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Worked Great! Handed them out at my club for free for guys to try and give me feedback! Awesome print thanks!

(Edited)

The profile uploader has replied

@jkisser

That's awesome! Thank you!

@OldBro3DGen

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

The print went well

Show original

@SavagePrints307

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Excellent design! I printed out of ASA, as I don’t have any PETG on hand. I imagine the ASA will hold up just fine, however. Printed in black (my only color on hand) and painted Lime Green with spray paint.

(Edited)

@user_988374984

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

This is the best empty chamber indicator I have found, and I have tried many others. This was perfect for my guns.

The profile uploader has replied

@jkisser

Glad to hear it!

@user_2238467734

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

This seems one of the better designs, it prints well and doesn't fall out.

The profile uploader has replied

@jkisser

Awesome! Glad it’s working so well for you!

@camillasolgaard

What filament did you use?

The designer has replied

@jkisser

Polymaker PETG

@Novadosed

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Printed well… I’m assuming the curve is to create a friction fit?

The profile uploader has replied

@jkisser

Yep!

@user_1530893056

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Good Thank you

Show original

@user2814724697

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

paßt gut 👍

@user_3006730251

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

prints perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.