Scarper with intercambiable blade

spatula for cleaning the printing plate but not only that, the spatula as seen in the photos is divided into 2 parts to have the possibility of changing the blade or printing it in the material you prefer based on the uses, I tested the file as You can see from the photos that the blades can be printed in the material you prefer based on the hardness you desire, I tested the file with PETG and it works great, pay attention when removing the supports inside the dovetail joint of the body because the tolerances are very small to fit together, I recommend sliding the blade back and forth a few times after removing the supports to facilitate future replacements

I tested it to remove pieces from the printer, ice from the car, to defrost the fridge from ice, to remove glue residues, etc.