Downrigger locking block
Print Profile(1)
Description
Locking block for Scotty Downriggers. Pair it with a padlock, and it will prevent someone from easily removing the bolts. Recommend printing with a stronger filament, something fiber reinforced just to make it a little bit harder to break. I used PETG-CF for these. Thick walls and heavy infill for more added strength. It won't be unbreakable by any means, but neither is a padlock. It's not going to stop a thief, but will slow them down enough to make them think twice.
Note: In order for this to work correctly, a properly sized padlock is required. Too small of a lock will not push snug against the knob and will allow it to spin freely. You will need a lock with a 7mm (9/32") diameter shackle. Here are the padlocks I am currently using.
Boost Me (for free)
If you like my work, please consider giving me a boost, and check out my profile for more designs.
Membership
Commercial license memberships available for all of my designs.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)