Rambo version - Plastic Soldier HD

Before printing from your computer make sure you have the latest version of BambuStudio otherwise you risk not having the supports enabled and the print profile settings configured

After the success of the Plastic Soldiers HD here is a new character to add to the collection: RAMBO

Please use Smooth PEI plates and not textured ones to avoid problems with the supports!

The model takes up the classic plastic soldiers but with the appearance as similar as possible to RAMBO, this to have a new character in the collection

If you liked the toy soldiers, don't miss the HD Plastic Tank: https://makerworld.com/en/models/1471132 

Print:

The RAMBO have easily removable tree supports. For the less experienced, with a pair of wire cutters cut the thicker branches first, the rest will be easily removed leaving the model clean.
Do not resize too much in smaller models or larger models otherwise you will have to modify the supports. 5\6 millimeters are tolerated without modifying the profile support settings (different measures are to be tested).

TEST:
The print profile has been tested several times on H2D and A1 mini printers, in order to perfect the supports as much as possible and make them compatible with all printers. Different materials have also been tested. Please avoid using PLA Matte and PLA Silk to avoid problems with the supports.

With all other types of filament no problem, please take care in removing the supports as usual and do not tear them off.

Enjoy!