Cipher's Cat Coin (Honkai Star Rail)

The cat-shaped coin that the character Cipher uses in the game “Honkai Star Rail” (HSR)!

DIameter of the circular part is 50mm.

Designed to print each half with a multi-color first layer.

A keychain version of the front and back pieces are also included. The ones I printed shown in the photo were scaled to 60%.

There's another file for the connecting alignment pin that doesn't have any clearance built in, in case the other one is too loose.

I also uploaded my OrcaSlicer 3MF file, which has the white cylinder (see below) in place. Be careful and make sure you are printing the white color last on the first layer.

What I did in that 3MF is to print all the first layer + the white part as one print, then as a separate print, I printed the rest on top.  This allowed me to do the first layer of both the front and back at the same time, saving on filament switches.

Or, you can set it up manually:

For the front and back each (OrcaSlicer/BambuStudio/PrusaSlicer: 

• Import one part
• Right-click, “Add Part”, upload the rest of the parts from the front/back.
• Change colors. I set the last color to be printed to the same AMS slot as the first one, and manually swapped that one out while it was printing.
• Use the Arachne slicing engine to print the small details more easily.
• Requires supports!

If your blue/orange/white filaments are too transparent with only 1 layer and the black behind it makes it look dull, use the [Back/Front]_with_disc file and the [BACK/FRONT]_disc additional part. This prints a thin layer of white between the face colors and the rest of it.