Valorant - Prime Vandal

If you want to sell 3D prints of my models you must be subscribed to the equivalent tier on my patreon.

This is a full size Prime Vandal prop from VALORANT, it is the biggest project I have done so far so I hope you all enjoy it :)

You will need around 1kg of filament in total to print the Prime Vandal, I used the colours Dark Gray, Silk Gold, White, Black and Purple. Some of the parts are printed on an angle vertically so I suggest that you either use a very clean/grippy build plate or place them flat on the plate (just keep in mind when you print them flat the layer lines on top will be more obvious). If you want to add additional strength there is a hole for a 6mm diameter rod through the prop.

Be careful when removing supports as some parts are quite fragile (even more so if you print in PLA Silk)

I have made a 32 Step build guide which is linked in the documentation (there is a reward at the end). 

Please post photos of your completed builds, I would like to see them.

I hope you all like it and good luck! 

There is also a cool stop motion assembly video thanks to @Xemplary Prints that you can find here: Video Link

Extra step becuase I forgot to add a small detail! ( thanks to @mxp99_cam for letting me know )

If you have already printed the vandal you will need to redownload the 3mf file and the extra piece will be on its own plate. Otherwise when you print it just put it into place :)