【Ford】Ford GT Mk IV Racing Supercar Champion Car 2023 Replica Assembly/Movable Wheels

【Special Notes for F1 Models】

1. The author has conducted structural printing tests on all models before release. However, the F1 model has a complex structure and requires high printing precision. Newcomers are advised to use the parameters in the slicer directly for printing and not to adjust them arbitrarily to avoid printing failures; experienced players may ignore this reminder.
2. The printing effect of the model is affected by various objective factors such as equipment, filament, and environment. If you encounter problems during printing, you are welcome to contact me through comments or private messages, and I will assist in troubleshooting. Creating is not easy. Please communicate before evaluating and do not give low scores at will; malicious negative reviews will result in being blocked. Thank you for your understanding!
3. All models from the author are tested based on Bambu Lab printers, and the configuration files use Bambu Lab's official slicing software. If you are using other brands of printers, it is recommended to adjust the parameters according to your own equipment's slicing software and preview before printing. Thank you for your cooperation!

4. As multi-color printing becomes the trend, the model is sliced with the H2C multi-nozzle printer by default. For other models, please refer to your own model for slicing preview to check the time and filament consumption.
5. Thank you again for the recognition and support from fellow enthusiasts. I hope to receive your likes and boosts. In 2026, let's unlock more F1 models together!

【Read Before Printing!!! Warm Tips】

It is strongly recommended to print the single-color configuration first before printing the multi-color configuration to test the model structure and slicing effect (Cost of single-color model printing: 64 scale 15g filament, 2 hours. 43 scale 50g filament, 3 hours). After being satisfied with the model's appearance, articulated structure, and slicing effect, then print the multi-color version. Thank you.

Note: Before printing the multi-color configuration file, you can enlarge it according to the complexity of the paint scheme. Preview in the slicing software to check the details and ensure printability.

---------⇪3D Printing Instructions-----------⇩ Product Introduction--------------

The Ford GT Mk IV is the ultimate evolution of the legendary Ford GT40.

As the ultimate track-only version of the third-generation Ford GT, it is limited to 67 units worldwide, honoring the 1967 Le Mans champion.
Its carbon fiber long-tail body, aggressive aerodynamic package, and extended wheelbase enhance high-speed stability. It is equipped with an upgraded 3.8-liter EcoBoost V6 engine producing over 800 horsepower, mated to a racing-specific Xtrac six-speed transmission and adaptive spool-valve suspension.
The car generates 1088 kg of downforce at 241 km/h. Its pure track-focused setup includes professional configurations such as a roll cage and racing seats. Hand-built by Ford and Multimatic, it marks the pinnacle of track performance for the series.

Model Description

- Movable wheels, assembly without glue

- All wheel hubs for 1/64 scale cars under this account are interchangeable. Browse the homepage to download your favorite wheel hub styles

Dimensions

- 1/64 scale

- 1/43 scale: Magnify by 150%
- Sliced files, use minimum printer size settings. You can adjust the number of models printed at once based on your printer size to save time and filament

FDM Printing Settings

- The actual model was printed using an A1 mini with a 0.4mm nozzle, 0.12mm layer height, and official PLA. Using equipment, parameters, and filament with higher specifications will yield better results (assembly may be too tight or too loose; this can be compensated by adjusting the XY contour dimensions of the assembly, or by using sanding tools and 409 glue for processing and connection).
- Infill density: 15%. To increase the model's weight, the infill density can be adjusted to 100%
- Supports: A combination of normal and tree supports was used.

- Various paint scheme versions will be released later. Follow the account to stay updated on new releases.

- You can also adjust the printing parameters based on your own printing experience.

Support Removal Instructions

- The model is small, and supports have been added at critical points. Removing supports requires the use of sprue cutters and tweezers. Breaking them off by hand will likely cause structural breakage, especially for the rearview mirrors and rear wing.

- Tip: To ensure successful removal from multi-color models and avoid breakage, you can first print a single-color model for removal to understand the model and support structure, then remove supports from the multi-color model (if breakage occurs, 409 glue can be used for connection).

Monochrome Painting Reference (Printed with White Filament)

- Sanding: (Optional) Sand in 400-600-800 grit order.

- Painting: Paint with acrylic colors using a brush (for issues with layer lines bleeding at edges, apply the main color over a large area first, then paint the edges).

- Polishing: Polish with a flannel cloth to give acrylic paint a shine.

Assembly Instructions

- For long-term stability, the wheels require moderate force to install, and will be stiff when first rotated. They will become more flexible after being played with a few times. See the GIF demonstration for wheel installation.

- For easy installation of wheel calipers, a dedicated wheel caliper installation tool has been designed and created. Link: 1/64 Scale Wheel Caliper Installation Tool by SAMPAN Replica - MakerWorld

Visit the author's homepage to see all vehicle models, welcome to like and follow!

Hope to see more friends share your printing photos, I'm curious what kind of works you will print!

We will continue to release various high-precision 3D printed vehicles, thank you for your attention and support!

China site:https://makerworld.com.cn/zh/@sampan1120
International site:https://makerworld.com/zh/@sampan1120