Print Profile(1)
Description
Boost Me (for free)
If you enjoyed this design and wish to see more like it, a small contribution would be greatly appreciated. Your support fuels new ideas, further testing, and of course, more filament to keep the creative process flowing.
JELLYCAT'S BASHFUL DRAGON KEYCHAIN
This project presents a simple and straightforward model: a keychain featuring an adorable dragon, a cherished member of my household. His name is Dragui, a gentle soul who usually behaves impeccably, although he did once consume all my stored cookies.
SIZE
60 x 42 x 3 mm
PRINTING INSTRUCTIONS
Printing this keychain doesn't require a multi-color module like AMS, MMU, or ACE. However, here's the printing process for each scenario:
AMS YES: You can use the uploaded print profile directly.
AMS NO: You can use the same print profile; however, a slightly different, uncomplicated process is required:
- Remove the BODY and TORUS parts; this leaves only the green components.
- Print directly and, upon completion, do not remove the printed model; maintain a heated bed to prevent detachment.
- Switch the filament to black or another color of your choice.
- Return to the slicer and reinstate the BODY and TORUS parts using CTRL + Z.
- Remove the remaining parts, leaving only the BODY and TORUS components this time.
- Send to print; the black color will print over the already printed green, resulting in a two-toned piece upon completion.
Caution: Do not move the parts, as this may cause them to print in different locations, leading to printing errors. Perform color purges correctly to avoid unexpected lines and smudges.
POTENTIAL ISSUES
Parts detaching: Clean the bed; the print has undergone four adhesion tests and has been verified to prevent detachment.
Parts not adhering: Ensure the same materials are used for each color. PLA AND PETG ARE NOT COMPATIBLE!
FILAMENTS USED
BLACK: BAMBU PLA BASIC
GREEN: OVERTURE PLA MATTE
CLOSING THOUGHTS
Once printed, all feedback—positive or negative—is welcome to enhance the model and design.
If you have any questions or suggestions, please let me know in the comments or via private message; I will gladly respond to everyone.
Furthermore, if this model reaches its like and download goal, I will upload a 3D scan of the figure.
HAPPY PRINTING!!
No AI was used to create this model; it was meticulously crafted from scratch in Fusion360. Support creators who dedicate their time to original designs. Thank you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)