David - The Lost Boys
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.32mm
The Model is 111.3x139mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.87996mm
Swap Instructions:
Start with Charcoal Black
At layer #8 (1.44mm) swap to Grey
At layer #9 (1.6mm) swap to Muted White
At layer #12 (2.08mm) swap to Cotton White for the rest.
Filaments used:
Polymaker Charcoal Black
Polymaker Cotton White
Polymaker Muted White
Overture Light Grey
Boost Me (for free)
If you like this consider boosting me for motivation to add more!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)