Longitudinal Connector for Fly Screen Frames

Here, I offer an adapter for connecting the rails of a fly screen frame lengthwise. I unfortunately mismeasured my rail and was able to resolve the issue with this connector. It is compatible with Windhager rails, as shown in the photograph. This type of frame rail is likely used by numerous other manufacturers as well.

They are slightly looser than the original corner connectors, allowing for easier removal while still maintaining a secure hold. Please ensure that support is removed from the small spaces between the rails; otherwise, the rail will not engage properly.
If you appreciate my design, I would welcome your feedback or a complimentary boost. Your support is invaluable to me. Constructive criticism is also greatly appreciated, as it assists in refining my abilities.

I'm providing an adapter designed to join the longitudinal rails of a fly screen frame.

I made an error in measuring my rail, and this connector proved to be a practical solution. As the image shows, it is compatible with Windhager rails, a design likely employed by many other manufacturers.

These connectors have a slightly more relaxed fit than the original corner connectors, simplifying removal while still providing a strong hold.

Remember to remove any support material in the narrow gaps to ensure the rails interlock correctly.

If you find my design useful, I would be grateful for your rating or a free boost. This will significantly help my progress. I also welcome constructive criticism, which helps me improve my skills.