Wall Mounted Floor Jack Hanger
Print Profile(2)
Description
Clear up floor space with this wall mounted floor jack hanger.
I'd recommend only using these will floor jacks that are rated for 2-½ tons or less, but I've had a 3-½ ton jack on one for several weeks, with no signs of bending or breaking. To be safe, I'd recommend placing these away from vehicles or anything that could get damaged in case of an accident.
The Standard version will accomodate floor jacks with wheel diameters up to ~3-½ inches (90 mm) with ~3 inches (74 mm) between wheels.
The Low Profile version will accomodate floor jacks with wheel diameters up to ~2-½ inches (65 mm) with ~3 inches (74 mm) between wheels.
In addition to the printed parts, you will need
- Qty 4 - #8 or #10 x 1-¼ inch construction screws
- Qty 2 - Cabinet screws (prefered) or long construction screws
When mounting the hanger to the wall, be sure to screw the hanger directly into a stud. Drywall anchors probably won't be strong enough or may pull out.
If you like this print, or find it useful, please consider pressing the like button, rating the profile, and…
Boost Me (for free)
Please consider boosting this model
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (104)