157 x 157 Shelf

This is a 157 x 157 shelf I designed for my Echo Show 5 and to hold random things. This is customizable to suit your needs. The side walls are (or at least should be according to the Skadis I use) depth. The rectangular spaces were originally meant to save on time and filament but then I saw there is a Skadis-like possibility for those who are looking for a bit more. I did not make the oval shape to hold the Echo in place, the shelf does that good enough for me but feel free to remix it all you want. In the one photo I have a Skadis mount Echo Show 5 mount and a Skadis hook just turned to its side and it holds a watch. I feel like there are a lot of ideas people can do with this.

I did make one of these using only a top and bottom shelf and it works just fine. Just putting that out there to save print time and/or filament.

Time for the print is about 140 minutes for each side and 180-190 minutes for each shelf. 

The hardware used was 18x M3*20 machine screws. You can use M3*16 screws if you like. 

You can modify to use heat insets. I had originally planned for that but the M3*20 screws did just fine.