African Queen_2
Print Profile(1)
Description
Project: Queen_2.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 253.16x150.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Elegoo Gray Transmission Distance: 3
PLA Eryone Silk Black_Gold Transmission Distance: 16
PLA Elegoo Silk Blue_Purple Transmission Distance: 2.5
PLA Elegoo Brown Transmission Distance: 2
PLA Elegoo Orange Transmission Distance: 7
PLA Elegoo White Transmission Distance: 5
This print uses 7 unique filaments
!!!! It is possible to print this hueforge with a single AMS unit just organize
your filament swap in away that makes the most sense to you !!!!!
Swap Instructions:
Start with Black
At layer #9 (0.48mm) swap to Gray
At layer #10 (0.52mm) swap to Black
At layer #11 (0.56mm) swap to Black_Gold
At layer #12 (0.6mm) swap to Blue_Purple
At layer #13 (0.64mm) swap to Brown
At layer #14 (0.68mm) swap to Blue_Purple
At layer #16 (0.76mm) swap to Brown
At layer #17 (0.8mm) swap to Orange
At layer #18 (0.84mm) swap to Black_Gold
At layer #19 (0.88mm) swap to Gray
At layer #21 (0.96mm) swap to White
At layer #25 (1.12mm) swap to White
At layer #27 (1.2mm) swap to White
At layer #30 (1.32mm) swap to White
At layer #32 (1.4mm) swap to Black_Gold
At layer #35 (1.52mm) swap to Black_Gold
At layer #41 (1.76mm) swap to Black_Gold for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)