African Warrior/ King Hueforge Art
Print Profile(1)
Description
Project: King_1.hfp
Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mm
The Model is 248.71x170.62mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Elegoo White Transmission Distance: 5
PLA Elegoo Basic Beige Transmission Distance: 8
PLA Elegoo Brown Transmission Distance: 2
PLA Elegoo Red Transmission Distance: 4
This print uses 5 unique filaments
!!!! It is possible to print this hueforge with a single AMS unit just organize
your filament swap in away that makes the most sense to you !!!!!
Swap Instructions:
Start with Black
At layer #19 (0.52mm) swap to White
At layer #20 (0.54mm) swap to Beige
At layer #21 (0.56mm) swap to Brown
At layer #22 (0.58mm) swap to White
At layer #23 (0.6mm) swap to Beige
At layer #25 (0.64mm) swap to Brown
At layer #26 (0.66mm) swap to Red
At layer #27 (0.68mm) swap to White
At layer #28 (0.7mm) swap to Beige
At layer #29 (0.72mm) swap to Red
At layer #30 (0.74mm) swap to Red
At layer #37 (0.88mm) swap to Beige
At layer #38 (0.9mm) swap to Beige
At layer #73 (1.6mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)