Vocore 6.8" display housing

I use this screen for a Playseat Evolution and there is a model for a mount here: Click

Instructions:

Carefully pry of the ribbon cable from the screen and place it in the slot in the rear part.
Use the clip to secure it.
Put the screen in between the front and rear part and gently screw it together with the m3 screws (not too tight).

If you want to use the rear mount you should first insert the heated inserts before anything else and then
install the screen afterwards.

BOM:

Vocore 6.8" screen

4 m3 x 10 countersunk

If you want to use the mounting holes in the back

4 m4 heated inserts

4 m4 x 10 countersunk