Whater Blaster

Suitable for: Electric Water Spray Kit 02 

https://eu.store.bambulab.com/de/products/electric-water-spray-kit-02?id=49450973495644

Only Kit 02, a standard PET bottle, and a ballpoint pen spring are required; everything else is 3D printed :)

Instructions

First, we adhere a spring to the trigger. I used a halved ballpoint pen spring here.

The spring should have a diameter of approximately 4-5mm:

For the electric kit, the hose connector must be trimmed to ensure a straight end:

Next, insert the switch through the tube:

And now the water kit:

The trigger is mounted using a bolt:

Then, carefully fit the switch into the handle, behind the trigger. Bend the cables slightly upwards here:

Now attach the hose and feed it through the handle from the front:

Glue the handle to the tube (I used standard superglue here):

The battery then goes into the rear closure piece:

Connect the battery and slide the closure piece into the tube.

Secure it from above using the head bolt:

Have fun ;)