Search models, users, collections, and posts
Logitech G29 Sequential Shifter Mod
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
18 min
1 plate
Open in Bambu Studio
Boost
15
19
0
0
15
5
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
This is a simple shifter mod for the Logitech G29.
For this mod, you will need two springs (linked).
- After printing out the parts, glue the springs in place (I used hot glue).
- Next, unscrew the six screws on top of the shifter and slide it upwards.
- You should now be able to insert the two parts. It might be a bit tricky if the springs are new, but with a bit of patience, it should be no problem.
- Finally, put the plastic frame back in place and screw the six screws back in.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)