Mechanical Articulated Velociraptor

Bring prehistoric motion to life with this fully articulated velociraptor model.  Turning the rear wheel animates the entire figure, making the tail sway, jaws open and close, arms and legs move in synchronized motion. Ideal as a fun mechanical toy or display piece. Print in PLA or PETG for durability and smooth movement. No supports or glue required; assembly instructions below.

1.Insert the snaps into the holes:

2. Clip these pieces together:

3. Place in the tail piece, it just sits there for now: 

4. Snap in the chest piece: 

5. Drop in the cylinder and rectangular piece:

6. Slide the piston into the hole in the rectangular piece: 

7. Drop in in the “driveshaft” and the small wheel over it:

8. Snap in place the other side of the velociraptor:

9. Push the roller wheels into the square pegs: 

10. Snap the hind legs together and insert arms and legs:

**Note both roller wheels have a peg which slides into a hole in the feet** 

11. Push in the two clips into the hind legs: 

***For A1 Mini Users, just snap the tail pieces together***

Enjoy!

If you have any trouble with anything let me know I will try to help and update the model if needed :)