Jack Socket Nut 1/4" (6.35mm) - Free 3D Print Model

Search models, users, collections, and posts

Filip Honzárek

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 15% infill

48 min

1 plate

5.0(14)

0.12mm layer, 2 walls, 15% infill - 5 Sizes

36 min

2 plates

3.7(3)

Open in Bambu Studio

Boost

246

481

294

Released

Description

Nut for use 1/4" (6.35mm) Jack Sockets. This is present on most guitar amplifiers and other studio audio devices. Color your gear.

Print instructions

Each printer has a different accuracy, if it's too tight scale it to 105% in your slicer.
PLA
0.1mm layer height
Infill 100%
Look to 3MF file for detailed print settings in PrusaSlicer.

Boost Me (for free)

Please consider leaving a review, like and Boost! And of course remember to share this with your friends! Thank you for the support!

Comment & Rating (25)

@tack

Boosted

Awesome Model! Thank you! Had scale it to 105% to work smoothly with various neutrik sockets (i.e., NRJ6HF and NMJ3HF).

@user_2877538490

Boosted

Thanks for the model, exactly what I needed to fix my nephew's Amplifier. No profile available, so I added mine.

The designer has replied

@FilipHonzarek

Thanks for profile.

@S3ND1T

Boosted

105% for Helix Stadium. Works great. Still enough room to put stock nuts on for safe keeping. I have shared this with other groups hopefully they'll get you boosted too. THANKS!

(Edited)

@ghensley3

fixed an older amp i had i used sugru on years ago to hold it in place... worked perfect.

@StageStudios

Print Profile

0.08mm layer, 2 walls, 15% infill

these are awesome, I run a rehearsal studios and the amount of times I’ve had to buy these off Amazon as customers end up either pinching them or accidentally unscrewing them and then getting sucked up in the vacuum. Anyway I printed a batch off and they are perfect, fit great and look great and seem as durable as anyone I’ve ordered off Amazon.