wall / desk clock Street-Art Neon Dragon

https://makerworld.com/en/collections/4639439-licensed-models

You can sell this model and all models in the above link with a Patreon membership.
www.patreon.com/cP_3D

Be sure to visit my profile page to find more great models!
https://makerworld.com/en/@cP3D

I have made another clock here. Maybe some of you also like this clock.
I could imagine that this watch would also be a very great gift for someone.

I created a version with 170 mm and 245 mm for wall and table

This model lights up under UV light! For example, if you let this light shine in your room, this model will also light up.

https://de.aliexpress.com/item/1005008137983740.html?spm=a2g0o.order_list.order_list_main.27.2b745c5f2hZhgg&gatewayAdapt=glo2deu

If you would like to get others excited about these wall clocks, please share the link on social media.

Here you will only find the dials!
You can find the necessary accessories under the following link:

https://makerworld.com/en/collections/4894074

To minimize print time without compromising quality, I configured height range modifiers in my print profiles. So don't be surprised if the swap instructions don't match the data in the print profile

I used filament from Polymaker for this model. For the best result, I recommend that you also use these colors.

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm

Swap Instructions:
    Start with Polymaker PolyLite PLA Pro Black
    At layer #18 (1.14mm) swap to Panchroma Luminous Blue
    At layer #32 (1.98mm) swap to Polymaker PolyLite PLA Pro Black
    At layer #33 (2.04mm) swap to Panchroma Luminous Blue
    At layer #37 (2.28mm) swap to Panchroma Neon Yellow
    At layer #44 (2.7mm) swap to Polymaker PolyLite PLA Pro Black
    At layer #45 (2.76mm) swap to Panchroma Neon Magenta for the rest.

If you get the message with the floating regions when slicing... you can ignore this
 

Here you can find my other dials collected
https://makerworld.com/en/collections/1715414