Diogo Jota tribute - Free 3D Print Model

Search models, users, collections, and posts

Buntsta

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(2)

All

P1P

X1 Carbon

H2D

X1E

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.08mm layer, 2 walls, 100% infill

Designer

4.4 h

1 plate

5.0(10)

0.08mm layer, 2 walls, 100% infill A1 Mini print

Designer

2.9 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

BuNtSt@ PrInTs

A Tribute to Diogo jota being greated at the gates.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.45x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.31646mm

Filaments Used:
    #080a0d PLA PolyLite Black Transmission Distance: 0.2
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8
    #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #13 (1.12mm) swap to Jade White
    At layer #27 (2.24mm) swap to Light Gray for the rest.