Kayak Fishing Tool Caddy for t-tracks
Print Profile(3)
Bill of Materials
- 1/4"-20 nut x 1: For reference, the ¼"-20 nuts that I use have a thickness of 5.44mm or 0.214" and an outer diameter of 10.97mm or 0.432" measuring on the flats.
- 1/4"-20 t-bolt x 1: At least 1" or Longer
Description
Kayak fishing tool caddy that mounts onto ¼" t-tracks. You will need a ¼"-20 T-bolt that's 1" or longer and a ¼"-20 nut. Most ¼" nut knobs should work well with this if you'd like to use your own. If you use mine, the nut will be embedded into the knob. The print profile includes a pause at the correct layer, just drop in the nut when the print pauses and resume. Make sure the nut is flush with the top of your print before resuming.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (39)