Mandoline Vegetable Slicer

A compact and efficient mandoline slicer designed for safe and precise slicing of vegetables. This model combines a 3D-printed body with minimal hardware and a replaceable metal blade.

🔧 Features:
Ergonomic Frame: Slanted base for effortless slicing at a natural angle

Trapezoidal Blade Slot: Compatible with a standard trapezoid utility blade (easily replaceable and sharp)

Assembly: Requires 3 countersunk M3×6 mm bolts to fix the blade and hold structural parts together

🛠 Assembly Instructions:
Insert the trapezoidal blade into the designated slot at the cutting angle.

Secure the blade and top plate using 3x M3×6 mm countersunk screws.

🖨️ Printing Recommendations:
Material: PETG or PLA

Layer height: 0.2 mm

Infill: 15% for rigidity

No supports needed

Safe (but it has sharp blade) and easy to clean — a perfect kitchen companion for slicing cucumbers, tomatoes, garlics, and more!


Safety Disclaimer

Using a mandoline slicer involves sharp blades and can result in serious injury if not handled properly. This 3D-printed mandoline is a functional tool, and caution must be exercised during both assembly and use.

By printing and using this slicer, you acknowledge and accept that:

• You are using it at your own risk.
• The creator is not responsible for any injuries or damages that may occur.
• You should always use protective tools (such as a hand guard or cut-resistant gloves) and keep fingers away from the blade during use.
• Always keep the slicer out of reach of children.
• Before use, thoroughly wash the blade from grease

Use with care. Stay safe.