Ioniq 5 trunk cover holder w/handle V2

This is inspired by SebiWin's simple and elegant design. It's for holding the flap of an Ioniq 5's trunk cover up and out of the way, as it has a tendency to flop down and get in the way when loading the trunk. In my version 2, I started a new design from the ground up, and improved the aesthetics so that it better matches the design of the car: visually compatible shapes, more refinement with fillets. I've also made it much easier to install (and remove). The default material is Bambu PETG-HF, since PETG is more resistant than PLA to the high temperature of a car interior in the sun.

***Please also check out my other design for an Ioniq 5! It's a protector for the child lock button, to keep it from being accidentally pressed. 

https://www.makerworld.com/en/models/2011550-ioniq-5-child-lock-button-protector#profileId-2167079

Installation:

You should only install one of these at a time, installing two makes it hard to remove the trunk cover. This is meant to go on the right side of the car (it only matters due to aesthetics, as the bottom side of the print doesn't look as nice). If you want it to go on the left side, just mirror the object in Bambu Studio before printing. 

Pull the cover out a little to give yourself clearance to work, then insert the bottom hook into the slot. 

Then just rotate it around and clip it into place.