Action camera mount for Bambu Lab P1S X1C - Free 3D Print Model

Search models, users, collections, and posts

Layer & Grain

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

X1 Carbon

P1P

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

4 plates

4.9(38)

Open in Bambu Studio

Boost

203

532

380

269

Released

Description

This Action Camera Mount is specifically designed for the Bambu Lab P1S and X1C. It securely attaches to the top clip of the enclosure, providing a stable mounting point for your action camera (such as a GoPro or similar models). Perfect for filming timelapses or monitoring your prints in real-time.

Included Parts

Plate 1, Rear Mount: Mounts the camera on the back clip (ideal for use with the hinge adapter),

Plate 2, Front Mount: Mounts the action camera on the front enclosure clip,

Plate 3, Hinge Adapter: A bridge piece that connects to the rear mount (Plate 1). It extends the camera forward, positioning it in front of the printer instead of on top. The hinge allows you to tilt the camera up or down for the perfect viewing angle (Only compatible with the rear mount).

Plate 4, Extension Bridge: A small straight adapter that extends the camera slightly forward when using either the front or rear mount.

Support

Custom designed supports are included directly in the model (except for the hinge adapter, which prints support free). These supports can be easily snapped off using pliers after printing.

Comment & Rating (47)

@xordac

Print Profile

0.2mm layer, 2 walls, 15% infill

small mod to make it work with my cam but everything about the design and print is great

The profile uploader has replied

@layer_and_grain

Awesome! Thanks for sharing the photo. Glad the design worked out well for you.

@gktjssla

It works perfectly on Osmo Action. It's cleaner and more flexible than the display panel mount type. Thank you for making a useful model

Show original

@Teazz

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect!

@user_1882121717

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@user_417469094

will this fit with ams on top?

The designer has replied

@layer_and_grain

yes if you look at the pictures you can see even the ams in my setup

@user_417469094

all right i will print this nice design👍

@randomdragon999

Print Profile

0.2mm layer, 2 walls, 15% infill

Works as intended.

(Edited)

@user_2258515390

Print Profile

0.2mm layer, 2 walls, 15% infill

Solid

Show original

@jb413

Print Profile

0.2mm layer, 2 walls, 15% infill

Had to bump up the walls to 4, because it was fragile from PETG.

@Melted_Lines

Print Profile

0.2mm layer, 2 walls, 15% infill

works perfect

@HobbyNest

Boosted

Just what I was looking for, thanks for creating the model!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.