Primer removing tool/ 9x19mm Luger decapping board

I present my initial iteration of a spent primer removal tool—
likely termed a decapping tool or depriming board in English.
Cartridges are inserted primer-first into the board, and the spent primers are gently dislodged from the casings.
Discarded primers collect in small receptacles (one per row) for convenient disposal.
Should you modify this design, kindly share your adaptations freely.

Crucially, my .m3f file employs a 102% scaling factor, optimal for my Bambu P1P printer!

English:

I'm sharing with you the first version of my primer removal aid—
in English probably called a decapping tool or depriming board.

The cartridges are inserted into the board primer-side down, and then the spent primers are lightly knocked out of the cases with a punch or rod.

The used primers fall into a small pocket (one per row) and can be easily dumped out afterward.

If you modify the model, please share your designs for free so others can benefit too!

Important: My .m3f file is set to 102% scaling—this works best for me on the Bambu P1P!