Lead Screw Slide Model
Print Profile(1)
Description
As you can see, this is a 3D printed industrial lead screw slide model
Boost Me (for free)
Your support is my biggest motivation
Tips 1 When printing the support rods, please clean the build plate or apply glue to prevent warping and jamming of the slider
2 If you change the print settings, do not change the layer height of the lead screw and slider. If the layer height is higher than 0.08mm, it will cause poor sliding or even jamming
3 I only tested it with PLA material, so please do not use other materials
4 The connecting rods at both ends are designed to be loose so that they can be inserted. You need to apply some glue yourself
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)