Ninja

cover

ChatGPT Image Jul 26, 2025, 01_39_12 PM.png

20250701_190553.jpg

20250701_190604.jpg

20250701_190615.jpg

20250701_190630.jpg

Nameless King Cover.jpeg

Nameless king cover1.jpeg

plate_1.png

plate_2.png

2025-07-01_67235257fe78b8.jpg

<ul><li>No glue required</li><li>Simple to assemble</li><li>No colors (refer to images if you would like to paint this model)</li></ul>

0.2mm layer, 2 walls, 15% infill

CalmOne

IMG_7726.jpg

IMG_7727.jpg

IMG_7729.jpg

IMG_7728.jpg

Thanks Ninja for the original profile that I could mess with!&nbsp;&nbsp;This is a One Part print! It took me a lot of time to figure out the best way to print this model in one part (over 10 attempts), but I got it to print and look good, with high detail. &nbsp;If you are going to print this, know that the supports are THICK and somewhat difficult to get off, feel free to change the support diameter if you think your printer wont have adhesion problems, because mine did and I have a brand new P2S. The current support diameter in this profile is 5.5.&nbsp;Some things I would recommend is to print the supports in a different color, that was my mistake and it make it hard to distinguish the model from the supports, if you don&#39;t mind the extra time of constantly swapping the filament. (Definitely need an AMS if you are going to do that btw). If you think you got it, go for it!&nbsp;I did change the layers to be 0.08 HQ for my print, if you don&#39;t care about that you can always change it to something better for your current setup.&nbsp;The filament I used for this print was eSun Bonewhite PLA. The recommended temp is 215 C. Otherwise when you change your filament in the profile make sure to check the temps its printing at.&nbsp;CAREFUL!! There are some parts on this print that are very fragile! Things like the belts on the front and the Spear can break! Be gentle around those areas.&nbsp;Tools? For sure pliers for the supports... again be gentle around those breakable areas&nbsp;Happy Printing!&nbsp;

0.08mm layer, 5.5 Support Diameter, One Part

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is a model of Dark Souls 3 iconic final boss “Nameless King”. This boss reappeared in the new game Elden Ring Nightreign as one of the end of day bosses. This boss is one of the most iconic souls-series bosses. I personally love this boss fight and I the character model is also very cool.I used MakerLab to help create this model. It is a extremely useful tool and I recommend that you check it out if you are interested in 3D printing.I did not add colors to this model, but if you would like to add colors, feel free to refer to the images attached.<boostme><boosttitle>Boost Me</boosttitle></boostme>

Nameless King Model

ASIA

Print Profile(2)

Description

Comment & Rating (21)

License

Related Models