Print Profile(1)
Description
Shoe tree for keeping the shoe box on your sneakers round and fresh. This is a real world scan of a normal shoe tree. The walls are thin and will flex to fit almost any shoe.
10,5 cm is for EU size 40. So add or subtract one centimeter for each size up or down. Also keep in mind adjusting the width of the model in your slicer.
I tried to make it similar to the cardboard shoe tree and this one.
Sizing guide
Z-height is from the print bed in the recommended printing oriantation.
*Should be printed with skirt on the flat surface. As the pictures shows.
| Z-height in CM | EU Shoe Size |
| 7 | 35 |
| 7,35 | 35,5 |
| 7,7 | 36 |
| 8,05 | 36,5 |
| 8,4 | 37 |
| 8,75 | 37,5 |
| 9,1 | 38 |
| 9,45 | 38,5 |
| 9,8 | 39 |
| 10,15 | 39,5 |
| 10,5 | 40 |
| 10,85 | 40,5 |
| 11,2 | 41 |
| 11,55 | 41,5 |
| 11,9 | 42 |
| 12,25 | 42,5 |
| 12,6 | 43 |
| 12,95 | 43,5 |
| 13,3 | 44 |
| 13,65 | 44,5 |
| 14 | 45 |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)