Mini Hornet from Hollow Knight - Free 3D Print Model

Search models, users, collections, and posts

TheLightning

Toys & Games>Characters

IP Report

Print Profile(1)

All

P1S

X1 Carbon

P2S

H2D Pro

H2C

H2S

P1P

A1 mini

X1E

H2D

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

4.4 h

5 plates

4.9(225)

Open in Bambu Studio

Boost

1717

3353

370

223

4.9 k

2.7 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

A mini of Hornet from Hollow Knight

A simple mini of Hornet.

A smaller cute Hornet

Some users experienced difficulty in attaching the legs to the base, I have modified the base (making it deeper, flipped it over and turned on ironing; and added a bevel for easier insertion. Also, the head got a little extra support, but I advise you to reduce the speed by 50% if you are using a bedslinger, such as the A1 and a1Mini.

Any issues, please send a comment and I will see about it. Thanks a lot for choosing my model :)

You will need 6x2mm magnets to attach the head and superglue to glue it together. There is an included pin you can use if you dont have magnets.

Insert the body into the dress, there is only one way to make it fit. If it does not, light sanding may be needed to get rid of the elephant foot that is preventing it from fitting, small drop of glue. The legs are glued on to the provided base, again – a small drop of superglue is enough.

Join the sword and glue it. Once you have the figurine assembled, you will notice a small hole in the sword. This is where the left hand is glued to it. You are free to pose it different, however I shaped the cloak so it looks like the sword lifted it.

Boost Me (for free)

Get the Knight too!

If you want to support me, you can join my Patreon page to support me and sell physical prints of my models with a clear conscience :D

https://www.patreon.com/c/thelightning3d/membership

Comment & Rating (370)

@Istorvir

Print Profile

0.16mm layer, 2 walls, 15% infill

I only used the needle from this project, but it's very nice. However, in my case, it didn't stick to the base. If anyone else has a similar problem, please add brim

@bdharrison

Do you have a link to that hornet model? It looks great!

@Istorvir

Replying to @bdharrison :

Sure. I sent you a DM so I wouldn't advertise another competing project here :D That would be a bit rude.

@adriand20012

wow, how cool!! Could you also send me the link to the model you used Thanks :)

Show original

@heymega

Boosted

The sword is held in place with hopes and dreams. Amazing design!

@dixiedog

amen

@mikrosmikrou

GIT GUD!!! nice print. With super glue everything stay as is!

@Primal_Aspid

GIT GUD!!!!!!!

@Primal_Aspid

Shaw!

@TheGr1mmetroupe

Replying to @Primal_Aspid :

@user_2392014494

Boosted

Beautiful and just perfect. I glued all the parts and I use PETG for more shine on the cloak.

(Edited)

The designer has replied

@TheLightning

Thanks for the Pic and boost! Any issues with the fit of the body to the dress and legs to the base? A user had an issue, so I'm wondering if it happened to you as well

@user_2392014494

Boosted

Replying to @TheLightning :

The only drawback I’ve found is that the legs don’t attach well to the base, so when gluing them, you have to hold the entire piece until the glue totaly dries. Maybe making the slots a bit deeper could fix this, but honestly, even as it is, it’s a 10/10.

@TheLightning

Replying to @user_2392014494 :

I was trying to be frugal with the base haha, ill try going a solid base and a bit deeper in. Thanks for the kind words :)

@tallworm

boo

@Mobziles3

OH HELL NAH THIS GUY HOUNTS MY DREAMS

@casensims

this is why I don’t go back to kingdoms edge

@tallworm

Replying to @casensims :

kingdoms edge sucks but the colosseum of fools is worth it if you need a lot of geo

@TickleMyPickles

Boosted

don't let anybody tell you a bedslinger can't handle it. full speed, .16 optimal😉

The designer has replied

@TheLightning

Holy heck, bro is mass producing my models for shameless profiteering, AND is bragging about it x.x

@TickleMyPickles

Boosted

Replying to @TheLightning :

No, hahaha. We always sub when producing for sale. these are for a bunch of friends that are all going crazy over Silksong right now! I also wasn't sure if I'd have any failures so I'd rather have extras than not enough and have to print more:) they turned out perfect though. awesome design!!

(Edited)

@arris_li_0530

Replying to @TickleMyPickles :

I dun buy it

@eddieoz

Print Profile

0.16mm layer, 2 walls, 15% infill

Awesome model!

@kia_jr

Print Profile

0.16mm layer, 2 walls, 15% infill

❤️

@user_2739574153

Hi! I tried to use your model on Bambu Lab A1 and everything came out great, beside the head. I have no idea where the problem is. I saw that you suggested to reduce the speed, but it didn't work for me. I would appriciate any advice that you may have :)

The designer has replied

@TheLightning

Hi, bedslingers are very tempermantal, at least in my case. Try applying glue, and manually reducing speed, acceleration and travel speed in the profile itself. if you don't know how to do that, lemme know and I will make a profile for you

@user_2739574153

Replying to @TheLightning :

I which speed was the cause of the problem so I would appreciate it if you made the profile for me :)

@bushydo13

Print Profile

0.16mm layer, 2 walls, 15% infill

scaled it at 120% is a bit of a pain to glue it, but not impossible. I mest up the magnet😂, i thought is for the base, not the head, that happens when you don't read carefully.

The profile uploader has replied

@TheLightning

Thanks for the rate! You can use the infamous pin to attach the head. Its also listed in the footer of my models https://makerworld.com/en/models/1616576-the-infamous-pin-6mm-magnet-replacement?from=search#profileId-1705929 Just remember to scale it

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.