timo1235

cover

2.png

IMG_20250630_114619.jpeg

IMG_20250630_114647.jpeg

IMG_20250630_114831.jpeg

IMG_20250630_114056.jpeg

dimensions.png

Screenshot 2025-07-01 163246.png

Outer

plate_1.png

inner

plate_2.png

inner with net

plate_3.png

Print with TPU

plate_4.png

Drain Adapter TPU

plate_5.png

2025-07-01_f8f91d9647086.gif

Tested with PETG/TPU. 4 walls for water resistance

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Seit über zwei Jahren zuverlässig im Einsatz! Mein 3D-gedruckter Skimmer saugt permanent Oberflächenschmutzpartikel ab – ganz einfach an jede Sandfilterpumpe oder an herkömmliche Skimmerhalter montierbar.</p><ul><li>Bei mir im Einsatz mit diesem <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/3TS9Oxk">Whirlpool</a></li><li>Passt auch zu den <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/4nqC47M">Standard-Skimmerhaltern</a> (siehe Bild)</li></ul><h3>Funktionsweise</h3><ol><li><strong>Ansaugung über Pool-Auslass</strong><ul><li>Anschluss der Pumpe an den vorhandenen Wasser-Auslass des Pools.</li><li>Innerhalb des Pools verbindet ein 30 mm Rohr den Auslass mit dem Skimmer.</li></ul></li><li><strong>Oberflächensauger</strong><ul><li>Schwebstoffe werden direkt von der Wasseroberfläche abgesaugt.</li></ul></li><li><strong>Bodendüse per Schnellwechsel</strong><ul><li>Vorne am Skimmer befindet sich ein zweiter Ausgang: einfach Stopfen umstecken, Bodenschlauch anschließen, fertig!</li></ul></li></ol><h3>Varianten</h3><ul><li><strong>Ohne Netz</strong> (Standard): Ideal bei wenig grobem Schmutz</li><li><strong>Mit Netzeinsatz</strong>: Grober Laub-, Insekten- und Schmutzfang</li></ul><h3>Vorteile</h3><ul><li>Kein Nachrüsten teurer Skimmer-Systeme</li><li>Individuell druckbare Lösungen für Pool &amp; Whirlpool</li><li>Robuste, wartungsarme Konstruktion</li></ul><h3>Druckhinweise &amp; Materialien</h3><ul><li><strong>Filament</strong>:<ul><li>Hauptbauteile: PETG (wasserfest)</li><li>Stopfen &amp; Adapter: TPU (flexibel)</li></ul></li><li><strong>Profil &amp; Auftrieb</strong>: Ich habe bereits ein passendes Druckprofil hinterlegt, das den inneren Auftrieb optimiert.</li></ul><h4>Empfohlene Druckeinstellungen</h4><ul><li>Outer Bauteil: 4 walls, 5 top/bottom layer, infill 20%, Support erforderlich</li><li>Inner Bauteil: 4 walls, 5 top/bottom layer, infill 25%, kein Support </li><li>Inner mit Netz Bauteil: 4 walls, 5 top/bottom layer, infill 10%, kein Support</li><li>Stopfen und Adapter mit TPU und 4 walls drucken.</li></ul>

<p>Dependably used for over two years! My 3D-printed skimmer continuously removes surface debris—easily mountable to any sand filter pump or conventional skimmer holder.</p><ul><li>Used with this <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/3TS9Oxk">Whirlpool</a> in my setup</li><li>Also compatible with <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/4nqC47M">standard skimmer holders</a> (see image)</li></ul><h3>Functionality</h3><ol><li><strong>Suction via pool outlet</strong><ul><li>Connect the pump to the existing pool water outlet.</li><li>A 30 mm pipe connects the outlet to the skimmer inside the pool.</li></ul></li><li><strong>Surface skimmer</strong><ul><li>Suspended solids are drawn directly from the water's surface.</li></ul></li><li><strong>Quick-change bottom nozzle</strong><ul><li>A second outlet is located at the front of the skimmer: simply swap the plug, connect the bottom hose, and you're done!</li></ul></li></ol><h3>Variants</h3><ul><li><strong>Without net</strong> (standard): Ideal for minimal coarse debris</li><li><strong>With net insert</strong>: Catches larger leaves, insects, and dirt</li></ul><h3>Advantages</h3><ul><li>No need to retrofit expensive skimmer systems</li><li>Customizable 3D-printed solutions for pools &amp; whirlpools</li><li>Robust, low-maintenance design</li></ul><h3>Printing Instructions &amp; Materials</h3><ul><li><strong>Filament</strong>:<ul><li>Main components: PETG (water-resistant)</li><li>Plugs &amp; adapters: TPU (flexible)</li></ul></li><li><strong>Profile &amp; buoyancy</strong>: I have already included a suitable print profile that optimizes internal buoyancy.</li></ul><h4>Recommended Print Settings</h4><ul><li>Outer component: 4 walls, 5 top/bottom layers, 20% infill, support required</li><li>Inner component: 4 walls, 5 top/bottom layers, 25% infill, no support </li><li>Inner component with net: 4 walls, 5 top/bottom layers, 10% infill, no support</li><li>Print plugs and adapters with TPU and 4 walls.</li></ul>

Pool Skimmer 

ASIA

Print Profile(1)

Description

Functionality

Variants

Advantages

Printing Instructions & Materials

Recommended Print Settings

Comment & Rating (15)

License

Related Models