Skull Rose Flower - Hueforge

Skulls and roses - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.4mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 0.2
    #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 4 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Gray
    At layer #22 (1.84mm) swap to white for the rest.