Classic Morris Minor Hueforge
Print Profile(1)
Description
Project: MorrisMinor.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA jayo black Transmission Distance: 0.1
PLA jayo white Transmission Distance: 7.6
PLA eryone blue Transmission Distance: 1.2
This print uses 3 unique filaments
Swap Instructions:
Start with black
At layer #12 (1.04mm) swap to white
At layer #21 (1.76mm) swap to blue
for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)