DynaMight

cover

Shell

plate_1.png

Buttons

plate_2.png

2025-06-30_9p86l3126gpd.jpg

Slight revision to the original model. Slight amendments to get the screen position level, it was 0.5mm off before and also has some better tolerences around the Micro SD slot. No real need to print.

Two plates, main shell and buttons.

PXL_20250620_062631011.MP.jpg

Slight amendment to the shell to give access to the CYD&#39;s USB port and also adds a button on the back to press the ‘Boot’ button, this allows easier flashing of firmware without disassembly. Just note that the USB port on the side will actually power the device but it will not charge the battery, its probably not safe to turn on the device by the switch and also power via USB on the side!!

Shell with programme button

Heres the 3D Files for the CYD (Cheap Yellow Display) handheld.&nbsp;Instructables link for the full build is here: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.instructables.com/Retro-Handheld-Based-on-the-ESP32-CYD-and-RetroGo/">https://www.instructables.com/Retro-Handheld-Based-on-the-ESP32-CYD-and-RetroGo/</a>

CYD RetroGo Handheld Console

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models