Kumoko
Print Profile(1)
Description
This is Kumoko from So im a spider, so what? this is based off a screenshot from the anime.
This one has a pink tint to it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 230x129.38mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #14 (1.2mm) swap to Hot Pink
At layer #18 (1.52mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
Do not decrease the size of this one, if you do it will be less detailed and the pink will be more prominent.
Boost Me (for free)
boost me if you like my prints
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)