D&D Monster Zombie Troll TTRPG Dungeon Miniature

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support.

Zombie Troll

Large undead, chaotic evil

Saving Throws: CON +8
Damage Resistances: necrotic; bludgeoning, piercing, and slashing from nonmagical attacks
Damage Immunities: poison
Condition Immunities: poisoned
Senses: darkvision 60 ft., passive Perception 9
Languages: understands Giant but can’t speak
Challenge: 6 (2,300 XP)
Proficiency Bonus: +3

Traits

Undead Fortitude.
If damage reduces the zombie troll to 0 hit points, it must make a Constitution saving throw with a DC of 5 + the damage taken, unless the damage is radiant or from a critical hit. On a success, the zombie troll drops to 1 hit point instead.

Regeneration (Reduced).
The zombie troll regains 5 hit points at the start of its turn. If it takes acid or fire damage, this trait doesn’t function at the start of its next turn.

Rotten Flesh.
Creatures that start their turn within 5 ft. of the troll must succeed on a DC 13 Constitution saving throw or be poisoned until the start of their next turn.

Actions

Multiattack.
The zombie troll makes two attacks with its claws and one with its bite.

• Claw. Melee Weapon Attack: +8 to hit, reach 5 ft., one target.
  Hit: 13 (2d6 + 6) slashing damage.
• Bite. Melee Weapon Attack: +8 to hit, reach 5 ft., one target.
  Hit: 15 (2d10 + 4) piercing damage.

This highly detailed Zombie Troll miniature was printed in FDM on a Bambu Lab A1 using PLA at 0.12mm layer height for optimal quality. Designed for tabletop RPGs like Dungeons & Dragons, this undead brute features:

• Ripped, decayed flesh with oozing wounds, exposed bones, and stitched scars
• Tattered clothes, detailed rot texture, and a grotesque, expressive face
• Comes in 3 different sizes:
  • 40mm – for standard large creature size in D&D
  • 60mm – heroic scale with better visibility on the table
  • 80mm – display piece or boss-scale

Perfect for painting and for horror-themed campaigns, this monster will terrorize your players and look stunning on the battlefield.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support