Lush Front Footpad - Flushy

Adaption of the Lush Back footpad from Sean. 

Printed with a .8 nozzle out of PCTG. I recommend filaments with high ductility to absorb impacts. DO NOT USE TPU FOR THIS DESIGN THAT IS COMING SOON.

6 wall

25% infill

Supports needed

I printed with higher infill around thinner areas around 80% to really improve strength

Not printable on a bambu machines except H2D. Requires 300x300 bed

Required Materials
Filament

Ruthex m5 Threaded Inserts

Ruthex m2.5 Threaded Inserts

Low profile wafer head 2.5m screws

Supports are not required in the insert holes or the straight alignment holes on the sides of the pad. There have been tolerances taken to make fitment easier.

https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B088QJDPKK?crid=3JB17VCO4O0IX&dib=eyJ2IjoiMSJ9.lZVehvTf-SgKdHWxr3sChoEGrAIyxSqWKWcPuwcezNNTRQcttNi2DyDmVr9iy1ErOniWPk0UU5tbXxI3-9rNbDdyeohrsnC_KKqNl3gATPakI5nSJL4WToxpyHdvWPQ_nQ_vUnc0WNJZEVnT8xqAINOmRf0Y5c4omAxl4p7yzCIUuwAtIll18hZYXL3surEPh9DTQQwi3wlZeo23VWXov23l4ogHXSxxhBbJnmSH21I.OgAstUB35DnNiAJXrVRc9ekd8lmx4aJtlcd1RRtzb3A&dib_tag=se&keywords=ruthex%2B%2C5&qid=1751226170&sprefix=ruthex%2B%2C5%2Caps%2C173&sr=8-1&th=1

https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8?crid=2O4W3O9VSXQT7&dib=eyJ2IjoiMSJ9.xcReEqHML-gD9bhfePpCGYwz5l1j3CDUISYsrehpvHNw0NvKU6YY2Q1lI3yNNIsrwoW36PPSztyMSVP6ly4h_FqDYxZh_oYITm_eFF51Rd9ml_9eWyWv6jeZIEss7st0e5XpIGdL_Rkm1uapxa1k0WspbXkvUPUK1eplORwF1DqhOKD7AUiCt8qOs6J08dRI.CtGaE69dhcc2VM-3iG3L2-RiDTJAaTAlByDCGVXQBgs&dib_tag=se&keywords=ruthex+m5&qid=1751226183&sprefix=ruthex+m%2Caps%2C192&sr=8-1

Discord@ - juhcarro