Breezy Boo - Halloween Ghost - Vintage Hueforge

👻 “Breezy Boo” – Classic Halloween Ghost - Vintage Ghost Hueforge Halloween Panel

Meet Breezy Boo—a whimsical, vintage-inspired Hueforge Halloween panel by Manic 3D Prints, featuring a classic trick-or-treat ghost with a pumpkin bucket, swirling wind, and a radiant crescent moon. Surrounded by autumn leaves and stylized skies, this print captures the nostalgic magic of Halloween nights gone by.

Designed for Hueforge printing, this art piece uses single layered depth to reveal warm tones with just 5 filament colors. No AMS or multicolor setup required—perfect for single-color printers and easy seasonal decorating. Display as part of your tiered tray, wall gallery, or festive shelf to bring cozy fall vibes to your space. Pairs perfectly with the rest of the Vintage Trick-or-Treat Parade collection.

Project: Classic Halloween - Ghost.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3 (Actual used: 3DHOJOR - PLA PRO - Black)
PLA Kexcelled Orange Transmission Distance: 8 (Actual used: Sunlu - PLA Matte - Orange)
PLA BambuLab Basic Yellow Transmission Distance: 6 (Actual used: Eleegoo - PLA Matte - Sunshine Yellow)
PLA BambuLab Matte Bone White Transmission Distance: 1.6 (Actual used: 3DHOJOR - PLA Matte - Light Khaki) 
PLA Kexcelled Skin Transmission Distance: 4.4 (Actual used: Overture - PLA Matte - Skin)
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to Bone White
At layer #20 (1.68mm) swap to Skin for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween Hueforge Collection: Vintage Trick-or-Treat Parade 🎃

Want to sell physical prints of this design?
Find Manic 3d Prints on Patreon, for just $5/month to get a commercial license for all my files. The link  can be found in my bio.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.