Midnight Stroll -Halloween Jack 1-Vintage Hueforge

🎃 “Midnight Stroll” – Classic Halloween Jack 1 - Vintage Pumpkin Gentleman Halloween Hueforge Art Piece

Midnight Stroll captures the timeless charm of Halloween with a dapper pumpkin-headed figure in pinstripes, confidently parading under a glowing crescent moon. Surrounded by swirling stars, autumn trees, and quaint rooftops, this vintage-inspired Hueforge art piece evokes the whimsy of a classic October night.

Crafted for single-color 3D printing using Hueforge’s layered depth technique, this art piece reveals rich tones and bold contrast using just 5 filament colors. Compatible with single- or multicolor printers, it makes a stunning addition to your Halloween wall gallery, tiered tray, or fall display. Part of the Vintage Trick-or-Treat Parade collection by Manic 3D Prints, this piece brings playful nostalgia to any seasonal setup.

Project: Classic Halloween - Jack.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3 (Actual: Black: 3DHOJOR - PLA PRO - Black)
PLA Kexcelled Orange Transmission Distance: 8 (Actual: Orange: Sunlu - PLA Matte - Orange)
PLA BambuLab Basic Yellow Transmission Distance: 6 (Actual: Yellow: Eleegoo - PLA Matte - Sunshine Yellow)
PLA BambuLab Matte Bone White Transmission Distance: 1.6 (Actual: Bone White: 3DHOJOR - PLA Matte - Light Khaki )
PLA Kexcelled Skin Transmission Distance: 4.4 (Actual: Skin: Overture - PLA Matte - Skin)
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.52mm) swap to Bone White
At layer #20 (1.68mm) swap to Skin for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween Hueforge Collection: Vintage Trick-or-Treat Parade 🎃

Want to sell physical prints of this design?
Find Manic 3d Prints on Patreon, for just $5/month to get a commercial license for all my files. The link  can be found in my bio.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.