Modern Minimalist Hook w/ Dual-Mount Backplate
Print Profile(1)
Description
This is a simple large entryway hook with a modern, minimalist design. The hook slides down on to the back plate, which can be mounted with with either 3M Command Strips* or with screws.
If mounting with screws, please do not remove the support interface material in the recessed areas for the Command Strips.
Small Command Strips that fit the notched recess:
https://www.amazon.com/Small-Refill-Replacement-Strips-64-Strips/dp/B0751RPC6Q
*Note: Using Command Strips won't secure the bracket as tightly as using screws (obviously). So you may experience some slight side-to-side wobble due to the slight give of the foam in the strip. I've tried to recess the back of the bracket to account for this, but there is a limit on how deep I can go due to needing to compress the adhesive a certain amount to fully activate the bond. It shouldn't affect the performance of the downward sheering force of the hook, but you should still exercise caution in consideration of the bearing load when using this method. I'm currently working on a way to improve the tolerances further in this regard.
Feel free to provide suggestions and feedback, thank you!!
Boost Me (for free)
If you find any value in my work, feel free to give it a like, boost or a follow – your support means the world!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)