Honeycomb Food Bowl

This is a Pet Food Bowl and everything is made of honeycombs for a few reasons. It won't have any moisture build up on the infill because there is no infill, it's easy to clean because there are no hidden crevices or lips, it takes a very small amount of filament to make, and all the holes make it less likely to blow away. It is not made for inside use as crumbs will fall through. I will add a coaster to collect crumbs so you can use it indoors. You can scale it up and down infinitely if you want to use it as a dog bowl, candy bowl, or any other type of bowl.

If you live in an area where during the summer it gets warm, even 25 Celsius or 80 Fahrenheit I recommend printing it in a bright colored PLA, so it doesn't get hot in the sun and deform or even melt. Either that or use PETG or HT PLA, I recommend Polymaker HT PLA as it is more Enviromental friendly, and in the event of very hard winds, if it blows away it won't produce micro-plastics, unlike PETG (Schwertheim). It also has a slightly higher Charpy impact strength, so it is less likely to break by impact. You can also print it in any color, and it won't deform, and it will be food safe at any temperature the outdoor elements can shine on it.

Citations

PLA does not release micro-plastics

Schwertheim, N. (2024, July). Study finds bio-based polylactic acid poses no microplastic risks. Https://Www.packaginginsights.com; CNS Media. https://www.packaginginsights.com/news/study-finds-bio-based-polylactic-acid-poses-no-microplastic-risks.html