Josie and the pussycats close-up

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x100mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Gray
    At layer #20 (1.68mm) swap to Jade White
    At layer #30 (3.68mm) swap to Black for the rest.