Printed for a friend. He wanted them without the tea light so I removed it. He plans on putting diodes in them. 😊

AndreasW

0.12mm layer, 2 walls, 15% infill

pabmiq

Aeondromach

ToraTiger

cover

BOTC_Townsquare_House.png

BOTC_Townsquare_Gravestone.png

PLA Haus.jpg

PETG Grabstein.jpg

plate_1.png

2025-06-29_10a822c6beef1.jpeg

🖨️ Druckeinstellungen: Ich habe die Teile mit meinen eigenen Support-Einstellungen auf einem BambuLab-Drucker gedruckt, unter Verwendung von BambuLab Basic PLA Matt.🔧 Einstellungen im Überblick:<ul><li>Schichthöhe: 0,12 mm</li><li>Wände: 2</li><li>Füllung: 15 %</li><li>Support: eigene Einstellungen (an Modell angepasst)</li></ul>Die Teile ließen sich sauber drucken und sehen mit dem matten PLA besonders schön auf dem Spieltisch aus!&nbsp;🖨️ Print Settings: I printed the parts using my own custom support settings on a BambuLab printer, using BambuLab Basic PLA Matte.🔧 Print Details:<ul><li>Layer height: 0.12 mm</li><li>Walls: 2</li><li>Infill: 15%</li><li>Supports: custom settings (adjusted to fit the model)</li></ul>The parts printed cleanly, and the matte PLA gives them a great look on the game table!

🖨 Print Settings: I printed the parts with my own custom support settings on a BambuLab printer, using BambuLab Basic PLA Matte.⚙ Print Details:<ul><li>Layer height: 0.12 mm</li><li>Walls: 2</li><li>Infill: 15%</li><li>Supports: custom settings (adjusted to fit the model)</li></ul>The parts printed cleanly, and the matte PLA gives them a great look on the game table!

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Deine Stimme... äh, dein Boost zählt! 🗳️🔥</boostcontent></boostme><h2>Blood on the Clocktower Townsquare Tealights</h2>Summary: Two different caps that fit on regular LED tea lights (Diameter 35mm).I use them for my townsquare instead of the original chips to turn to mark when a player died.The lid house means the player is alive. When they die I replace it with a gravestone with a lit tealight.When the player used their ghost vote I finally turn off the light. Having the house and gravestone in different colors helps to quickly identify from any angle who and how much players are still alive (counting the houses) and how many votes are still on the table (lit candles).Also it gives a nice impression :)IMPORTANT: Only use LED tea lights. Please don&#39;t set the townsquare on fire. Note: This is not my original model. It is a reupload of the following design from Thingiverse: &#34;Blood on the Clocktower Townsquare Tealights&#34; by HaktosTheUnscarred licensed under the Creative Commons – Attribution – Share Alike license.Original: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:6991220">Link</a>All rights and original design credit go to the original creator. I have only reuploaded the model here to make it available on the BambuLab platform.____________________________________________________________________________________________________________________________________________________<h2>Blood on the Clocktower Dorfplatz Teelichter</h2>Zusammenfassung: Zwei verschiedene Aufsätze, die auf gewöhnliche LED-Teelichter passen (35mm Durchmesser). Ich benutze sie auf meinem Dorfplatz anstelle der ursprünglichen Chips, um anzuzeigen, wenn ein Spieler gestorben ist.Das Häuschen bedeutet, dass der Spieler noch lebt. Wenn er stirbt, ersetze ich es durch einen Grabstein mit einem beleuchteten Teelicht. Wenn der Spieler seine Geisterstimme abgegeben hat, schalte ich das Licht schließlich aus.Dass Haus und Grabstein in unterschiedlichen Farben sind, hilft dabei, aus jedem Blickwinkel schnell zu erkennen, wer noch lebt (gezählt anhand der Häuschen) und wie viele Stimmen noch im Spiel sind (beleuchtete Kerzen).Außerdem sieht es auch noch schön aus :)WICHTIG: Nur LED-Teelichter verwenden. Bitte setzt den Dorfplatz nicht in Brand.Hinweis: Dies ist kein eigenes Modell, sondern ein Reupload des folgenden Designs von Thingiverse: &#34;Blood on the Clocktower Townsquare Tealights&#34; von HaktosTheUnscarred lizenziert unter der Creative Commons – Attribution – Share Alike Lizenz.Original: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:6991220">Link</a>Alle Rechte und die ursprüngliche Gestaltung gehen auf den ursprünglichen Ersteller zurück. Ich habe das Modell lediglich hier erneut hochgeladen, um es auf der BambuLab-Plattform zugänglich zu machen.&nbsp;&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your boost counts! 🗳️🔥</boostcontent></boostme><h2>Blood on the Clocktower Townsquare Tealights</h2>Summary: Two distinct caps designed to fit standard LED tealights (35mm diameter). I utilize them on my townsquare in lieu of the original chips to indicate player deaths. The house signifies a living player. Upon death, it's replaced by a lit gravestone tealight. The light is finally extinguished when a player uses their ghost vote. The contrasting colors of the house and gravestone facilitate rapid identification from any vantage point—easily counting surviving players (houses) and remaining votes (lit candles). It also adds a pleasing aesthetic :)IMPORTANT: Employ LED tealights exclusively. Avoid igniting the townsquare. Note: This is not an original design. It's a reupload of the following Thingiverse creation: &#34;Blood on the Clocktower Townsquare Tealights&#34; by HaktosTheUnscarred licensed under the Creative Commons – Attribution – Share Alike license.Original: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:6991220">Link</a>All rights and original design credit belong to the original creator. This reupload simply makes the model accessible on the BambuLab platform.____________________________________________________________________________________________________________________________________________________<h2>Blood on the Clocktower Townsquare Tealights</h2>Summary: Two distinct caps designed to fit standard LED tealights (35mm diameter). I utilize them on my townsquare in lieu of the original chips to indicate player deaths. The house signifies a living player. Upon death, it's replaced by a lit gravestone tealight. The light is finally extinguished when a player uses their ghost vote. The contrasting colors of the house and gravestone facilitate rapid identification from any vantage point—easily counting surviving players (houses) and remaining votes (lit candles). It also adds a pleasing aesthetic :)IMPORTANT: Employ LED tealights exclusively. Avoid igniting the townsquare. Note: This is not an original design. It's a reupload of the following Thingiverse creation: &#34;Blood on the Clocktower Townsquare Tealights&#34; by HaktosTheUnscarred licensed under the Creative Commons – Attribution – Share Alike license.Original: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:6991220">Link</a>All rights and original design credit belong to the original creator. This reupload simply makes the model accessible on the BambuLab platform.&nbsp;&nbsp;

Print Profile(1)

Description

Blood on the Clocktower Townsquare Tealights

Blood on the Clocktower Townsquare Tealights

Comment & Rating (3)

License

Related Models