Fredster

cover

IMG_7667.JPEG

IMG_7668.JPEG

IMG_7669.JPEG

plate_1.png

0.2mm layer, 2 walls, 10%/30% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle></boostme>This is a door wedge which is designed to be printed in 2 materials. On the outside I recommend a soft TPU. I printed it with 95A. Inside something firmer like PLA, PETG, ABS. I have only tried PETG and PLA.&nbsp;I recommend infill of less than 10% on the outside so that the TPU is nice and elastic.&nbsp;I printed it with an H2D, so TPU in the AMS was not a problem. For those who only have one nozzle, I strongly recommend the special TPU for AMS from Bambulab.&nbsp;It&#39;s best to simply use my print profile :)-------------------------------------------------------------------------------------------------------------------------&nbsp;Dies ist ein Tür keil welcher darauf ausgelegt ist, in 2 Materialien gedruckt zu werden. Außen empfehle ich ein weiches TPU. Ich habe es mit 95A gedruckt. Innen etwas festeres wie PLA, PETG, ABS. Ausprobiert habe ich nur PETG und PLA.Ich empfehle außen Infill von unter 10%, damit das TPU schön elastisch ist.Ich habe es mit einem H2D gedruckt, so war das Thema TPU im AMS kein Problem. Für alle die nur eine Düse haben, empfehle ich dringend das spezielle TPU für AMS von Bambulab.Am besten einfach mein Druckprofil nutzen :)

<boostme><boosttitle>Boost Me</boosttitle></boostme>This door wedge is designed for dual-material 3D printing. I recommend a supple TPU, such as 95A, for the exterior. For the interior, a firmer filament like PLA, PETG, or ABS is suitable. I have personally tested PETG and PLA.&nbsp;For optimal elasticity, I suggest using less than 10% infill for the exterior TPU.&nbsp;I printed this using a dual-extrusion H2D printer, so using TPU in the AMS presented no difficulties. For single-extrusion setups, Bambu Lab's specialized AMS TPU is highly recommended.&nbsp;Using my provided print profile is strongly advised.-------------------------------------------------------------------------------------------------------------------------&nbsp;This is a door wedge designed for dual-material printing. A soft TPU is recommended for the exterior; I used 95A. A firmer material, such as PLA, PETG, or ABS, is suitable for the interior; I have only tested PETG and PLA.I recommend less than 10% infill for the exterior to ensure TPU elasticity.I printed this with a dual-extrusion H2D printer, making AMS TPU use straightforward. Single-nozzle users are strongly encouraged to use Bambu Lab's specialized AMS TPU.For optimal results, please utilize my print profile.

Print Profile(1)

Bill of Materials

Description

Comment & Rating (11)

License