Kayak cup holder with extended arm for T-track
Print Profile(2)
Bill of Materials
- 1/4"-20 T-bolt 1-1/2" long x 1: At least 1-1/2" long. A longer T-bolt would also work fine.
- 1/4"-20 nut x 1:
Description
You'll need a 1-½" or longer ¼"-20 t-bolt and ¼" nut to complete this as pictured. The print profile has a built in pause to add the nut, which will be embedded in the knob. Most other nut knobs that utilize a ¼" nut should also work fine with this cup holder. For reference, the ¼"-20 nuts that I use have a thickness of 5.44mm or 0.214" and an outer diameter of 10.97mm or 0.432" measuring on the flats.
This cup holder works best with t-tracks that are fairly level, as there is no angle adjustment. The arm will swing around and extend in and out for better positioning.
The inside bottom of the cup holder tapers to 76mm or 3", while the top opening is 84mm or 3.3". It's sized to accommodate most cups, but some of the largest ones won't work.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)