Black-clad Man, a classic character from Detective Conan, Mr. Hanazawa the culprit

The perpetrator, Mr Hanazawa, a classic character from Detective Conan. It can be seamlessly inserted into crevices or used as a bookmark

No AMS required, four colors are needed: black, white, gray, and blue (blue is optional)

Print with 100% infill, 0.08 mm layer height, and 0.16 mm first layer height. The model measures 100 x 100 mm

You may print with higher layer heights and a first layer height below 0.24 mm. The maximum allowable thickness is 2 mm, the actual thickness is 2 mm

Filaments Used:

#000000 Black Translucency: 0.3

#002e96 Blue Translucency: 1.4

#646464 Dark Gray Translucency: 1.8

#ffffff White Translucency: 6

This print utilizes four distinct filaments. Replacement instructions:

Begin with black

Switch to blue at layer 8 (0.72 mm)

Switch to dark gray at layer 9 (0.8 mm)

Switch the remainder to white at layer 15 (1.28 mm)

Pause points have been added. If blue filament is unavailable, substitute gray; this will not affect the final result