WofCrafft vise boltlock in the Dremel Workstation 220

This is a remix of the bolt locker with cap from SilverTripple. This design is for the WolfCraft Simplex 60 vise attachment for Dremel Workstation 220. The 6mm bolt clamp that comes with the vise requires 10mm box range for adjusting, I have created the bolt locker with cap based on the design of SilverTripple for the column lock of the Dremel Workstation 220. This will makes the adjustment of the vise tool less.

Printed in Bambu Lab PETG-HF filament with the settings below.

Nozzle = 0.4mm
Layer height = 0.16mm optimal

Strength:
Wall loops = 6
Top surface pattern = Rectinilnear
Bottom surface pattern = Rectinilnear
Sparse infill density = 45%
Sparse infill pattern = Rectilinear