ŠKODA 1203- Hueforge
Print Profile(2)
Description
This is 4 color Hueforge of Škoda 1203
I uploaded two sizes 200x133 X1/P1/A1 and size 180x120 for A1 Mini.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
Boost Me (for free)
I have printed all my creations myself. If you like my work, please send me support, it will help me earn more. Do not hesitate and send me if you have an idea for a nice picture. Thank you.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.41mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#ff6a13 PLA BambuLab Basic Orange Transmission Distance: 6.4
#8e9089 PLA BambuLab Basic Gray Transmission Distance: 1.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #10 (0.88mm) swap to BambuLab Basic Orange
At layer #14 (1.2mm) swap to BambuLab Basic Gray
At layer #16 (1.36mm) swap to BambuLab Basic Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)